10:40. Tips of steering draft
Prevention
At removal of a tip of steering draft it is necessary to use a stripper of spherical hinges. At installation it is necessary to use new самоконтрящуюся a nut of fastening of the spherical hinge of a tip of steering draft.
Removal
The bottom view on a tip of steering draft
|
|
1 – tightening bolt of a tip of steering draft;
2 – carving regulator of steering draft;
3 – tightening bolt of steering draft |
Removal of the spherical hinge of a tip of steering draft from a rack of a forward suspension bracket
| PERFORMANCE ORDER |
| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a forward wheel. Tighten the emergency brake, then lift a forward part of the car and fix on supports. Remove the corresponding forward wheel. |
| 2. Weaken the bolt clamping a tip of steering thirst for the carving regulator of steering draft (see rice. The bottom view on a tip of steering draft). |
| 3. Unscrew самоконтрящуюся the nut fixing the spherical hinge of a tip of steering thirst for a rack of a forward suspension bracket. |
| 4. Using a stripper of spherical hinges, take a pin of the spherical hinge of a tip of steering draft from a rack of a forward suspension bracket (see rice. Removal of the spherical hinge of a tip of steering draft from a rack of a forward suspension bracket). |
| 5. Using paint or an adhesive tape, note an arrangement of a tip of steering draft on the carving regulator. It is also possible to count number of rounds of a carving on the acting part of the carving regulator. Unscrew a tip from steering draft. |
| 6. The tip of the right steering draft is marked by a letter R, and the tip of the left steering draft has no marking. |
|
Installation
| PERFORMANCE ORDER |
| 1. Screw a tip of steering draft on the carving regulator in the same situation, as before removal. |
| 2. Establish a pin of the spherical hinge of a tip of steering draft on a rack of a forward suspension bracket and fix new самоконтрящейся by a nut, having tightened it the required moment. |
| 3. Tighten the bolt clamping a tip of steering draft. |
| 4. Establish a wheel and lower the car on the earth. Tighten bolts of fastening of a wheel the required moment. |
| 5. Check and, if necessary, adjust the angles of installation of forward wheels. |
|
АкваСтрой: 
