77d7eb28

10:17. Springs of a back suspension bracket (SOHC model)

Removal

PERFORMANCE ORDER
1. On models with the SOHC engine replacement of springs of a back suspension bracket needs to be made in turn. Replacement of springs of a back suspension bracket needs to be made in pairs. When replacing springs it is recommended to replace at the same time and rubber buffers.
2. On models with the self-leveled back suspension bracket take off pressure in system, having let out the air via the valve in the luggage compartment.
3. Lift a back part of the car and fix on supports.
4. Using a jack, slightly raise the corresponding longitudinal lever of a back suspension bracket.
5. Unscrew the bolt fixing the lower part of the shock-absorber to the longitudinal lever of a back suspension bracket and take the shock-absorber from the lever.
6. Being careful, slowly lower the jack supporting the longitudinal lever of a back suspension bracket and remove a spring and rubber buffers.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. Check correctness of an arrangement of end faces of a spring on the longitudinal lever and the bottom of the car.
2. Tighten a bolt of fastening of the lower part of the shock-absorber the required moment.
3. On models with the self-leveled back suspension bracket increase in system pressure to 0,8 bars.