77d7eb28

10:37. Pump of the amplifier of steering


Prevention

At connection трубопрово Dov it is necessary to use new sealing rings.


MODELS OF 1,6 L (TILL 1992)

Removal

Arrangement of bolts of fastening of the pump of the amplifier of steering on models of 1,6 l till 1992

PERFORMANCE ORDER
1. Remove the case of the air filter located on the right side of a motor compartment.
2. Take off a generator drive belt / on Sosa of the amplifier of steering.
3. Unscrew three bolts and remove a pulley of the pump of the amplifier of steering.
4. Release and remove an external casing of a gear belt.
5. Disconnect pipelines from the pump and close the ends of pipelines suitable traffic jams.
6. Unscrew two bolts and remove the pump from the block of cylinders, moving it towards the generator (see rice. An arrangement of bolts of fastening of the pump of the amplifier of steering on models of 1,6 l till 1992).
7. At a pump exit out of operation it needs to be replaced as repair of the pump is not provided.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At connection of pipelines use new sealing rings. Establish and adjust a tension of a belt of the drive of the generator/pump of the amplifier of steering.
2. Add liquid in system of steering and remove air from hydraulic system.

MODEL 1,6 (SINCE 1993), 1,8 AND 2,0 L

Removal

Hydraulic connections of the pump of the amplifier of steering on models of 2,0 l
1 – connection of the pipeline;
2 – connection of a flexible hose

PERFORMANCE ORDER
1. Take off a belt of the drive of the pump of the amplifier of steering.
2. Disconnect the pipeline and a flexible hose from the pump and close their ends traffic jams (see rice. Hydraulic connections of the pump of the amplifier of steering on models of 2,0 l).
3. Unscrew four bolts and remove the pump of the amplifier of steering from the car.
4. At a pump exit out of operation it needs to be replaced as repair of the pump is not provided.

Installation

Arrangement of bolts of fastening and bolts which need to be weakened at adjustment of a tension of a driving belt on l models 1,8 and 2,0 till 1992
The moments of tightening of bolts And, In and With are given in technical characteristics.

Arrangement of bolts of fastening of the pump of the amplifier of steering on models with DOHC engines
1 – a bolt of fastening of the pump to an arm;
2 – a bolt of fastening of the pump to an arm;
3 – a bolt of fastening of a bracket to the pump;
4 – a bolt of fastening of a bracket to the engine

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At connection of the pipeline to the pump use a new sealing ring. Establish and adjust a tension of a driving belt. Keep in mind that tightening of bolts of fastening of the pump of the amplifier of steering needs to be made with various moment (see rice. An arrangement of bolts of fastening and bolts which need to be weakened at adjustment of a tension of a driving belt on l models 1,8 and 2,0 till 1992, the Arrangement of bolts of fastening of the pump of the amplifier of steering on models with DOHC engines).
2. Add liquid in system of steering and remove air from hydraulic system.