77d7eb28

10:10. Replacement of plugs of the forward stabilizer of a cross ustoycha of a vost

The provision of a tip on the forward stabilizer of cross stability (the sizes are specified in millimeters)

PERFORMANCE ORDER
1. Remove the stabilizer of cross stability.
2. For replacement of the adjusting plug on the end of the stabilizer of cross stability fix the stabilizer in a vice with soft sponges and, using a kiyanka and a drift, bring down a tip from the stabilizer.
3. Using a screw-driver edge as the lever, remove the plug from a stabilizer tip.
4. Moisten the new plug with soap water and insert it into a stabilizer tip.
5. Similarly replace the second tip of the stabilizer.
6. After removal of one of tips from the stabilizer it is possible to make replacement of plugs of fastening of the stabilizer to the lower forward frame. For this purpose just pull together the plug on the stabilizer and in the same way install the new plug.
7. Install a tip on the stabilizer of cross stability in the situation shown in the drawing.
8. Before installation of the stabilizer check a condition of rubber pillows of fastening of the stabilizer to the lower lever and, if necessary, replace them.
9. Install the forward stabilizer of cross stability.