10:14. A nave of a back wheel (model with the SOHC engine)
Prevention
At installation it is necessary to use the new forelock fixing a nave nut from unscrewing.
Installation of a nave / brake disk
Installation of a washer on a nave / a brake disk
Nuts of fastening of a nave / brake disk
MODELS WITH BACK DRUM BRAKES
Removal
| PERFORMANCE ORDER |
| 1. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. Lift a back part of the car and fix on supports. Remove the corresponding back wheel. |
| 2. Remove the brake drum. |
| 3. Using a screw-driver edge as the lever, take off a dustproof cap of a nave. |
| 4. Take the forelock fixing a nave nut from unscrewing, then unscrew a nut of fastening of a nave. For deduction of a nave from a provorachivaniye when unscrewing a nut of fastening of a nave screw in two bolts of fastening in a nave and insert mount between bolts. |
| 5. Remove a persistent washer and a nave from a nave pin. |
|
Installation
| PERFORMANCE ORDER |
| 1. Establish a nave and an internal ring of the external bearing on a nave pin. At the same time do not damage the sealing ring established from the inside of a nave. |
| 2. Establish a persistent washer and screw a nut of fastening of a nave, then adjust a side play of the bearing of a back wheel. |
| 3. Using the new forelock, record a nut of fastening of a nave from unscrewing, then establish a dustproof cap of a nave. |
| 4. Install the brake drum and check adjustment of a cable of the emergency brake. |
| 5. Lower the car on the earth and tighten bolts of fastening of a wheel the required moment. |
|
MODELS WITH BACK DISK BRAKES
Removal
| PERFORMANCE ORDER |
| 1. On models with back disk brakes the nave and a brake disk represent one detail. |
| 2. In the presence take off a wheel cap, then weaken bolts of fastening of a back wheel. Lift a back part of the car and fix on supports. Remove the corresponding back wheel. |
| 3. Remove a brake support, without disconnecting from it a brake hose and using a soft wire, suspend a support to a back suspension bracket. |
| 4. Using a screw-driver edge as the lever, take off a dustproof cap of a nave. |
| 5. Take the forelock fixing a nave nut from unscrewing, then unscrew a nut of fastening of a nave. For deduction of a nave from a provorachivaniye when unscrewing a nut of fastening of a nave screw in two bolts of fastening in a nave and insert mount between bolts. |
| 6. Unscrew a nut and remove from a nave pin a washer and a nave / a brake disk. If the nave / a brake disk are not removed, take away from the brake drum of a block of the emergency brake for what insert the screw-driver through an adjusting opening in a nave / a brake disk and turn a regulator wheel. |
|
Installation
| PERFORMANCE ORDER |
| 1. Establish a nave / a brake disk and an internal ring of the external bearing on a nave pin. At the same time do not damage the sealing ring established from the inside of a nave / a brake disk. |
| 2. Establish a persistent washer and screw a nut of fastening of a nave, then adjust a side play of the bearing of a back wheel. |
| 3. Using the new forelock, record a nut of fastening of a nave from unscrewing, then establish a dustproof cap of a nave. |
| 4. Check adjustment of the emergency brake and establish a brake support. |
| 5. Lower the car on the earth and tighten bolts of fastening of a wheel. |
|
