| 1. Remove a weight wire from the accumulator. |
| 2. Weaken a collar, the fixing main air branch pipe by the left end of the measuring instrument of a stream of air. |
| 3. Unscrew four bolts fixing the heater block to the throttle case. Separate the heater block from the throttle case, then disconnect a hose from the lower part of the block and take the block from a motor compartment. Arrange pure rags under connection of a fuel hose with the fuel highway. |
| 4. Slowly weaken the connecting coupling of fastening of a fuel hose in fuel system, then disconnect a hose from the fuel highway. Close the end of a hose a suitable stopper. |
| 5. Similarly disconnect the second fuel hose from the fuel highway. |
| 6. Disconnect two hoses of ventilation of a case of the engine from a cover of a head of the block of cylinders. Disconnect a hose of big diameter from the case of a throttle and remove it. |
| 7. Disconnect a vacuum tube from the top part of the regulator of pressure of fuel. |
| 8. Disconnect the electric socket from the measuring instrument of a stream of air and remove a sealing ring from the socket. |
| 9. Disconnect the electric socket from the sensor of provision of a butterfly valve. |
| Remove an accelerator cable from the lever of a butterfly valve and unscrew an arm of fastening of a cover of a cable of an accelerator from an inlet collector and move it aside (see rice. An arrangement of bolts of fastening of a cover of a cable of an accelerator on the DOHC models). |
| Disconnect a casing of a plait of wires from fuel nozzles and move it aside, without pulling a wire. Squeeze brackets of fastening and, having pulled a casing of wires on themselves, disconnect electric sockets from fuel nozzles. |
| Unscrew two nuts of fastening of the fuel highway and remove the fuel highway together with fuel nozzles from an inlet collector. Whether note a grounding tire arrangement on a hairpin of fastening of the fuel master (see rice. A grounding tire arrangement on a hairpin of fastening of the fuel highway on the DOHC models). |
| For removal of a fuel nozzle from the fuel highway, using a screw-driver edge, remove a metal bracket of fixing and take a fuel nozzle from the fuel highway. |
