5.2.4. Air filter
Prevention
If the round air filter is installed, you watch the corresponding description in subsection 6.3.
Removal
Weakening of a collar of fastening of an air branch pipe to the air stream measuring instrument
Unscrewing of the screw of fastening of the resonator
Extraction of the resonator from under a wing arch
Removal of a branch pipe of the resonator
| PERFORMANCE ORDER |
| 1. Disconnect a hose with cooling liquid of a broad tank from a cover of the air filter and move it aside. |
| 2. Weaken a collar and disconnect an air branch pipe from the air stream measuring instrument (see rice. Weakening of a collar of fastening of an air branch pipe to the air stream measuring instrument). |
| 3. Remove a weight wire from the accumulator, then disconnect the electric socket from the air stream measuring instrument. |
| 4. Disconnect two brackets of fixing on the left side of a cover of the air filter, then unscrew two screws on the right side of a cover of the air filter and uncover. |
| 5. Take the filtering element from the case of the air filter. |
| 6. Weaken nuts of fastening of hoses of heating. |
| 7. Unscrew nuts, the fixing two rubber racks located from the lower party of a casing of the air filter. |
| 8. On some models the resonator of the air coming to the engine for noise reduction is installed. The resonator is located under an arch of a wheel and connects a branch pipe to an air inlet pipe.
|
| 9. Before removal of a pipe of an air inlet remove the resonator. For this purpose tighten the emergency brake, then lift a forward part of the car and record on supports. |
| 10. Unscrew screws and take a mudguard from under a wing arch. |
| 11. Unscrew the screw, then disconnect the resonator from a branch pipe and take it from under a wing arch (see rice. Unscrewing of the screw of fastening of the resonator, Extraction of the resonator from under a wing arch). |
| 12. If necessary remove an air inlet pipe, previously having disconnected a branch pipe from under a wing arch (see rice. Removal of a branch pipe of the resonator). |
| 13. Turning and moving an air inlet pipe, release adjusting pins from the forward panel of a body. It is rather labor-consuming operation and for simplification of removal of a pipe of a vozdukhozaborna it is possible to remove a headlight. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. At ustan ке the filtering element the rubber flange has to be directed up. |
|
