5.2.24. Potentiometer of provision of a butterfly valve
Removal
| PERFORMANCE ORDER | ||||
|
Installation
| PERFORMANCE ORDER | |
|
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engine
- 4. Cooling systems, heating and ventilation
- 5. Fuel system
- 5.1. Fuel and exhaust systems of models with the carburetor
- 5.2. The fuel and exhaust system of models with system of injection of fuel
- 5.2.1. Technical characteristic
- 5.2.2. General information
- 5.2.3. Check of system of injection of fuel
- 5.2.4. Air filter
- 5.2.5. Air chamber
- 5.2.6. The control unit of temperature of the air coming to the engine
- 5.2.7. The sensor of temperature of the air coming to the engine
- 5.2.8. Removal of pressure in fuel system
- 5.2.9. The fuel filter on models with the fuel pump out of the fuel tank
- 5.2.10. The fuel filter on models with the pump in the fuel tank
- 5.2.11. Check of the fuel pump
- 5.2.12. The fuel pump installed out of the fuel tank
- 5.2.13. The fuel pump installed in the fuel tank
- 5.2.14. Replacement of the relay of the fuel pump
- 5.2.15. Pipe of a fuel-filling mouth
- 5.2.16. Fuel tank
- 5.2.17. Fuel level sensor
- 5.2.18. Quencher of fluctuations of fuel
- 5.2.19. Accelerator cable
- 5.2.20. Check and adjustment of fuel mix on idling turns
- 5.2.21. Fuel pressure regulator
- 5.2.22. Regulator of turns of idling
- 5.2.23. Sensor of provision of a butterfly valve
- 5.2.24. Potentiometer of provision of a butterfly valve
- 5.2.25. Air stream measuring instrument
- 5.2.26. Measuring instrument of mass of a stream of air
- 5.2.27. Tape measuring instrument of mass of a stream of air
- 5.2.28. Fuel nozzles (except Multec)
- 5.2.29. Fuel nozzle (Multec system)
- 5.2.30. Check of a fuel nozzle (Multec system)
- 5.2.31. The throttle case (except the Multec system)
- 5.2.32. Throttle case (Multec system)
- 5.2.33. Step engine of management of air supply (idling turns)
- 5.2.34. Potentiometer of provision of a butterfly valve
- 5.2.35. Electronic control device (ECU)
- 5.2.36. Sensor of a detonation and module (X16 SZ models)
- 5.2.37. Sensor of a detonation (Simtec system)
- 5.2.38. An inlet collector (the SOHC engine without Multec)
- 5.2.39. An inlet collector (the SOHC engine with Multec)
- 5.2.40. Inlet collector (DOHC models)
- 5.3. Exhaust system and system of decrease in toxicity of exhaust gases
- 5.4. Fuel systems of the diesel engine
- 6. Electric systems of the engine
- 7. Transmission
- 8. Power shafts
- 9. Brake system
- 10. Suspension bracket and steering
- 11. Body
- 12. Electric equipment
- 13. Check of malfunctions
