| 1. Remove a weight wire from the accumulator. |
| 2. Weaken the collars fixing the main air branch pipe to the case of a throttle and the measuring instrument of a stream of air and remove a branch pipe. |
| 3. Weaken a collar and disconnect a hose of the regulator of turns of idling from the throttle case. |
| 4. Disconnect the hose of ventilation of a case going from a cover of a head of the block of cylinders to the throttle case. |
| 5. Disconnect hoses of giving I cool liquid Russian cabbage soup from the case of a throttle and close the ends of hoses I cool with suitable traffic jams for reduction of loss liquid Russian cabbage soup. |
| 6. Disconnect the electric socket from the sensor of provision of a butterfly valve. |
| 7. Remove an accelerator cable from the lever of a butterfly valve. |
| 8. Take a sealing ring of a cover of a cable of an accelerator from an arm on an inlet collector, then otsoyed to Nita a returnable spring of the gate from an arm (see rice. A detachment of a returnable spring of a butterfly valve from an arm on an inlet collector). |
| 9. Check that all hoses and электричес sockets are disconnected by Kia from the throttle case. |
| 10. Unscrew four nuts and remove the throttle case from an inlet collector (see rice. Unscrewing of nuts of fastening of the case of a throttle, Removal of the case of a throttle on the SOHC models). For access to the lower nuts of fastening of the case of a throttle move fuel hoses aside. |
| 11. Remove laying of the case of a throttle. |
| 12. If necessary remove the sensor of provision of a butterfly valve from the throttle case. |
