| 1. Remove a weight wire from the accumulator. |
| 2. Disconnect the electric socket from the measuring instrument of mass of air. Remove a sealing ring from the electric socket. |
| 3. Weaken a collar, the fixing main air branch pipe to the right side of the measuring instrument of mass of air. |
| 4. Unscrew four bolts fixing an air chamber to the throttle case. Raise an air chamber from the case of a throttle and disconnect a hose from the basis of an air chamber. Then take knot of the measuring instrument of mass of air / an air chamber. |
| 5. Disconnect the electric socket from the sensor of provision of a butterfly valve. |
| 6. Remove an accelerator cable from the lever of a butterfly valve. Take a sealing ring of a cover of a cable of an accelerator from an arm on an inlet collector and move an accelerator cable aside. |
| 7. Disconnect two hoses of ventilation of a case of the engine from a back part of a cover of a head of the block of cylinders. Disconnect a hose of bigger diameter from the case of a throttle and remove it. |
| 8. Arrange pure rags under one of connections of a fuel hose with the fuel highway. |
| 9. Slowly weaken a connecting nut of a fuel hose for removal of pressure in the fuel highway, then disconnect a hose from the fuel highway. Close the end of a hose a suitable stopper. |
| 10. Similarly disconnect the second fuel hose from the fuel highway. |
| 11. Disconnect a vacuum pipe from the top part of the regulator of pressure of fuel. |
| 12. Disconnect a casing of a plait of wires from fuel nozzles and move it aside, without pulling a wire. Squeeze brackets of fastening and, having pulled a casing of wires on themselves, disconnect electric sockets from fuel nozzles. |
| 13. Unscrew a connecting nut and remove a vacuum hose of the vacuum amplifier of brakes on the left side of an inlet collector (see the drawing). |
| 14. Unscrew a nut and remove an arm of support of a fuel hose on the left side of the throttle case. |
| 15. Unscrew nuts and remove grounding tires from racks from two sides of the fuel highway. |
| 16. Unscrew a bolt and remove an arm of support of electric wires and a hose on the left side of an inlet collector. |
| 17. Remove the regulator of turns of idling. |
| 18. Unscrew a nut and take a bolt of the top fastening of the generator to an inlet collector. |
| 19. Check that all hoses, pipes and electric sockets are disconnected from an inlet collector. |
| 20. Unscrew nuts and remove an inlet collector from a head of the block of cylinders. Remove laying of an inlet collector. |
| 21. If when unscrewing nuts of fastening of an inlet collector from a head of the block of cylinders hairpins are unscrewed, after removal of a collector screw in hairpins in a head of the block of cylinders. |
| 22. If necessary remove the remained elements from an inlet collector. |
