5.2.1. Technical characteristic
General information|
Type of system of injection of fuel:
| |
|
C16 NZ, C16 NZ2, X16 SZ and C18 NZ
|
Central system of injection of Multec fuel
|
|
20 NE, C20 NE and 20 SEN (till 1990)
|
Motronic M4.1
|
|
20 NE, C20 NE and 20 SEN (since 1990)
|
Motronic M1.5
|
|
20 XEJ and C20 XE (till 1993)
|
Motronic M2.5
|
|
C20 XE (since 1993)
|
Motronic M2.8
|
|
X20 XEV
|
Simtec 56.1
|
|
Capacity of the fuel tank
|
61 l
|
|
Octane number applied топлива*:
| |
|
Ethylated gasoline
|
98 RON
|
|
Unleaded gasoline
|
95 RON
|
* Models with the catalyst (engines with the first letter C or X) have to be operated only on unleaded fuel.
Idling parameters
|
Idling turns:
| |
|
– C16 NZ and X16 SZ
|
850 ± 80 rpm
|
|
– C16 NZ2
|
880 ± 80 rpm
|
|
– C18 NZ
| |
|
• models with the mechanical transmission
|
880 ± 80 rpm
|
|
• models with the automatic transmission
|
830 ± 80 rpm
|
|
– 20 NE, C20 NE and 20 SEN
|
800 ± 80 rpm
|
|
– 20 XEJ and C20 XE
|
940 ± 80 rpm
|
|
– X20 XEV
|
850 ± 160 rpm
|
 Idling turns on these models are not regulated, and are given only for information. | |
|
Contents WITH in exhaust gases:
| |
|
– 20 NE and 20 SEN
|
At most 1,0%
|
|
– X20 XEV
|
0,7 – 1,2%
|
| Other models |
0,3% (at 2800 – 3200 rpm)
|
Fuel pressure at the connected vacuum hose
|
Multec
|
0,76 bars
|
|
Motronic M4.1:
| |
|
– the giving hose
|
2,3 – 2,7 bars
|
|
– returnable hose
|
0,3 – 1,5 bars
|
|
Motronic M1.5
| |
|
– the giving hose
|
1,8 – 2,2 bars
|
|
– returnable hose
|
0,3 – 1,5 bars
|
|
Motronic M2.5
|
2,0 – 2,2 bars
|
|
Motronic M2.8
|
2,2 – 2,7 bars
|
|
Simtec 56.1
|
There are no data
|
Tightening moments
The tightening moments on models with systems of injection of fuel same, as well as on models with carburetors except for below-mentioned.
|
The fuel highway to an inlet collector
|
8 Nanometer
|
|
Fuel stream quencher
|
20 Nanometer
|
|
Holder of a fuel nozzle
|
3 Nanometer
|
|
Fuel pressure regulator
|
2,5 Nanometer
|
|
Clip of the fuel pump
|
4 Nanometer
|
|
The step engine operating air supply in the engine on idling turns
|
2,5 Nanometer
|
|
The detonation sensor to the block of cylinders (X16 SZ)
|
13 Nanometer
|
|
Oxygen sensor
|
30 Nanometer
|
|
Throttle case
|
20 Nanometer
|
|
Fastening of the top part of the case of a throttle to lower
|
6 Nanometer
|
|
Potentiometer of provision of a butterfly valve
|
2 Nanometer
|
|
Casing of the air gate to an inlet collector
|
9 Nanometer
|