3.1.9. Removal and installation of the engine together with the transmission
Prevention
For removal and installation of the engine it is necessary to use the load-lifting mechanism and a jack.
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engine
- 3.1. Repair of SOHC engines
- 3.1.1. Technical characteristic
- 3.1.2. General information
- 3.1.3. System of ventilation of a case
- 3.1.4. Check of a compression
- 3.1.5. Repair operations on the engine installed in the car
- 3.1.6. The repair operations demanding removal of the engine
- 3.1.7. Recommendations about removal of the engine
- 3.1.8. Removal and installation of the engine without transmission
- 3.1.9. Removal and installation of the engine together with the transmission
- 3.1.10. Replacement of support of the engine and transmission
- 3.1.11. Repair of the engine
- 3.1.12. A gear belt and pulleys (without automatic mechanism of a tension)
- 3.1.13. Installation
- 3.1.14. Adjustment of a tension
- 3.1.15. A gear belt and the mechanism of a tension (l models 1,4 and 1,6 except C16 NZ2)
- 3.1.16. An opening in a back casing of a gear belt on l models 1,4 and 1,6
- 3.1.17. Gear belt and mechanism of a tension (l C16 NZ2 models 1,8 and 2,0)
- 3.1.18. Forward sealing ring of the camshaft
- 3.1.19. Back sealing ring of the camshaft
- 3.1.20. Camshaft and case of the camshaft
- 3.1.21. Removal and installation of a head of the block of cylinders on the engine in the car
- 3.1.22. Removal and installation of a head of the block of cylinders on the removed engine
- 3.1.23. Repair of a head of the block of cylinders
- 3.1.24. Cleaning and survey of a head of the block of cylinders
- 3.1.25. Hydraulic pushers of valves
- 3.1.26. Flywheel
- 3.1.27. Replacement of a forward sealing ring of a bent shaft
- 3.1.28. Replacement of a back sealing ring of a bent shaft
- 3.1.29. Oil pallet
- 3.1.30. Oil pump
- 3.1.31. Repair of the oil pump
- 3.1.32. Removal and installation of pistons and rods
- 3.1.33. Check of pistons and rods
- 3.1.34. Removal and installation of a bent shaft
- 3.1.35. Check of a bent shaft
- 3.1.36. Survey and check of a gap in radical and conrod bearings
- 3.1.37. Check of a working gap of the bearing
- 3.1.38. Check of the block of cylinders of the engine
- 3.1.39. Start of the engine after capital repairs
- 3.2. Repair of DOHC engines
- 3.3. Repair of the diesel engine
- 3.1. Repair of SOHC engines
- 4. Cooling systems, heating and ventilation
- 5. Fuel system
- 6. Electric systems of the engine
- 7. Transmission
- 8. Power shafts
- 9. Brake system
- 10. Suspension bracket and steering
- 11. Body
- 12. Electric equipment
- 13. Check of malfunctions
Prevention