3.1.9.2. Separation of the transmission from the engine
| PERFORMANCE ORDER | |||||
|
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engine
- 3.1. Repair of SOHC engines
- 3.1.1. Technical characteristic
- 3.1.2. General information
- 3.1.3. System of ventilation of a case
- 3.1.4. Check of a compression
- 3.1.5. Repair operations on the engine installed in the car
- 3.1.6. The repair operations demanding removal of the engine
- 3.1.7. Recommendations about removal of the engine
- 3.1.8. Removal and installation of the engine without transmission
- 3.1.9. Removal and installation of the engine together with the transmission
- 3.1.9.1. Removal
- 3.1.9.2. Separation of the transmission from the engine
- 3.1.9.3. Connection of the transmission with the engine
- 3.1.9.4. Installation
- 3.1.10. Replacement of support of the engine and transmission
- 3.1.11. Repair of the engine
- 3.1.12. A gear belt and pulleys (without automatic mechanism of a tension)
- 3.1.13. Installation
- 3.1.14. Adjustment of a tension
- 3.1.15. A gear belt and the mechanism of a tension (l models 1,4 and 1,6 except C16 NZ2)
- 3.1.16. An opening in a back casing of a gear belt on l models 1,4 and 1,6
- 3.1.17. Gear belt and mechanism of a tension (l C16 NZ2 models 1,8 and 2,0)
- 3.1.18. Forward sealing ring of the camshaft
- 3.1.19. Back sealing ring of the camshaft
- 3.1.20. Camshaft and case of the camshaft
- 3.1.21. Removal and installation of a head of the block of cylinders on the engine in the car
- 3.1.22. Removal and installation of a head of the block of cylinders on the removed engine
- 3.1.23. Repair of a head of the block of cylinders
- 3.1.24. Cleaning and survey of a head of the block of cylinders
- 3.1.25. Hydraulic pushers of valves
- 3.1.26. Flywheel
- 3.1.27. Replacement of a forward sealing ring of a bent shaft
- 3.1.28. Replacement of a back sealing ring of a bent shaft
- 3.1.29. Oil pallet
- 3.1.30. Oil pump
- 3.1.31. Repair of the oil pump
- 3.1.32. Removal and installation of pistons and rods
- 3.1.33. Check of pistons and rods
- 3.1.34. Removal and installation of a bent shaft
- 3.1.35. Check of a bent shaft
- 3.1.36. Survey and check of a gap in radical and conrod bearings
- 3.1.37. Check of a working gap of the bearing
- 3.1.38. Check of the block of cylinders of the engine
- 3.1.39. Start of the engine after capital repairs
- 3.2. Repair of DOHC engines
- 3.3. Repair of the diesel engine
- 3.1. Repair of SOHC engines
- 4. Cooling systems, heating and ventilation
- 5. Fuel system
- 6. Electric systems of the engine
- 7. Transmission
- 8. Power shafts
- 9. Brake system
- 10. Suspension bracket and steering
- 11. Body
- 12. Electric equipment
- 13. Check of malfunctions
For removal and installation of the engine it is necessary to use the winch and the lifting device. If from the automatic transmission even the hydrotransformer partially is removed considerable leak of liquid can take place. For prevention of leak of liquid, being careful, disconnect the engine from the transmission and press the hydrotransformer to the transmission. If there is a need to remove the transmission from the car, fix the hydrotransformer, having screwed bolts on a coupling case metal strips.