3.1.10. Replacement of support of the engine and transmission
Prevention
At installation it is necessary to use new bolts of fastening of the left and right arm to a body.
The power unit fastens in a motor compartment on three support, two of which are fixed on the transmission and one on the engine.
Arrangement of bolts of fastening of the right support of the power unit
|
|
1 – fastening bolts to a body;
2 – fastening bolts to the block of cylinders
|
Arrangement of bolts of fastening of the left support of the power unit
|
|
1 – fastening bolts to a body;
2 – bolts of fastening of an arm to the block
|
Right support
| PERFORMANCE ORDER |
| 1. Tighten the emergency brake, then lift a forward part of the car and establish on supports. |
| 2. Hook on the engine captures грузоподъ the pit mechanism and raise so that the weight of the engine was perceived by the load-lifting mechanism. |
| 3. Working under the car, unscrew bolts of fastening of a support from the block of cylinders and a body. Take the right support of the power unit from under the car (see rice. Arrangement of bolts of fastening of the right support of the power unit). |
| 4. Unscrew the fastening block from an arm. |
| 5. Install the new block of fastening on an arm and fix by bolts, having tightened them the required moment. |
| 6. Install the right support of the power unit on the block of cylinders and fix by bolts, having tightened them the required moment. |
| 7. Fix the right support of the power unit to a body by new bolts, having tightened them the required moment. |
| 8. Disconnect captures of the load-lifting mechanism from the engine. |
| 9. Lower the car on the earth. |
|
Left support
| PERFORMANCE ORDER |
| 1. Tighten the emergency brake, then lift a forward part of the car and establish on supports. |
| 2. Hook on the engine captures грузоподъ the pit mechanism and raise so that the weight of the engine of a vosprina matsya by the load-lifting mechanism. |
| 3. Working under the car, unscrew the fastening block from an arm and a body (see rice. Arrangement of bolts of fastening of the left support of the power unit). |
| 4. Using a tap of M10x1,25, clear a carving in body openings for fastening of the left support of the power unit. |
| 5. Install the new block of fastening on an arm and fix by bolts, having tightened them the required moment. |
| 6. Fix the left support of the power unit to a body and tighten bolts the required moment. |
| 7. Disconnect captures of the load-lifting mechanism from the engine. |
| 8. Lower the car on the earth. |
|
Back support
| PERFORMANCE ORDER |
| 1. Tighten the emergency brake, then lift a forward part of the car and establish on supports. |
| 2. Hook on the engine captures грузоподъ the pit mechanism and raise so that the weight of the engine of a vosprina matsya by the load-lifting mechanism. |
| 3. Working under the car, unscrew a back support from the lower frame and an arm. |
| 4. Install the new block of fastening on the lower frame and an arm and fix by bolts, having tightened them the required moment.
|
| 5. Disconnect captures of the load-lifting mechanism from the engine. |
| 6. Lower the car on the earth. |
|
