Opel Vectra A - the Repair manual and operation

6.23.2. Model 16 SV

Dismantling

Extraction of a cylindrical pin, the fixing distributor shaft drive plug on model 1,6 l (BOSCH distributor)

Removal of washers from an ignition distributor shaft

Removal of washers from an ignition distributor shaft on model 1,6 l (BOSCH distributor)

Extraction of a clamp of the electric socket (LUCAS distributor)

Detachment from a back part of the socket of the small socket on models 1,6 l (LUCAS distributor)

Unscrewing of screws of fastening of a basic plate

Extraction of a basic plate from the ignition distributor case on model 1,6 l (LUCAS distributor)

Arrangement of the screw of fastening of a basic plate on model 1,6 l (LUCAS distributor)

PERFORMANCE ORDER

1. Using the hammer and a drift, beat out the cylindrical pin fixing the drive plug to a distributor shaft (see rice. Extraction of a cylindrical pin, the fixing distributor shaft drive plug on model 1,6 l (BOSCH distributor)). 2. Remove the plug of the drive and a washer from an ignition distributor shaft (see rice. Removal of washers from an ignition distributor shaft). 3. Take a distributor shaft together with the cylindrical screen with teeths from the case of the distributor and remove washers from a shaft (see rice. Removal of washers from an ignition distributor shaft on model 1,6 l (BOSCH distributor)). 4. On the LUCAS distributor remove a spring clamp of the electric socket, then take the socket from the case of the distributor of ignition and from a reverse side of the socket disconnect the small electric socket (see rice. Extraction of a clamp of the electric socket (LUCAS distributor), the Detachment from a back part of the socket of the small socket on models 1,6 l (LUCAS distributor)). 5. Unscrew screws and take a basic plate from the distributor case (see rice. Unscrewing of screws of fastening of a basic plate, Extraction of a basic plate from the ignition distributor case on model 1,6 l (LUCAS distributor), the Arrangement of the screw of fastening of a basic plate on model 1,6 l (LUCAS distributor)).

Check

PERFORMANCE ORDER

1. Check a condition of a cover of the distributor of ignition for existence of corrosion of contacts, black paths between contacts, and also integrity and smoothness of movement of coal contact in the center of a cover. With defects replace an ignition distributor cover. 2. Check a state and fastening of metal contact of a rotor of the distributor. If the contact burned or its fastening weakened, replace a distributor rotor. In the presence, remove a deposit and traces of corrosion from contact, using a small file. 3. Check a condition of a sealing ring in a back part of the distributor of ignition and, if necessary, replace it.

Assembly

PERFORMANCE ORDER

1. Assembly is made in the sequence, the return dismantling. At assembly correctly establish washers. Install the plug of the drive so that the ledge of the plug entered a groove in the top part of a shaft of the distributor. 2. Install the ignition distributor, then check and, if necessary, adjust an ignition advancing corner.