6.29. Motronic system elements
Sensor of temperature of cooling liquid
Removal
Detachment of the electric socket from the sensor of temperature of cooling liquid
 |
| PERFORMANCE ORDER | ||||||
|
Installation
| PERFORMANCE ORDER | ||
|
- 1. Maintenance instruction
- 2. Maintenance
- 3. Engine
- 4. Cooling systems, heating and ventilation
- 5. Fuel system
- 6. Electric systems of the engine
- 6.1. Technical characteristic
- 6.2. General information
- 6.3. System of ignition
- 6.4. Check of system of ignition
- 6.5. Rules of care of the accumulator
- 6.6. Check of the accumulator
- 6.7. Accumulator charging
- 6.8. Accumulator
- 6.9. System of charging
- 6.10. Generator
- 6.11. Driving belt of the generator
- 6.12. Removal and installation of the generator
- 6.13. Generator brushes
- 6.14. BOSCH generator
- 6.15. Small-sized DELCO-REMY generator
- 6.16. System of start of the engine
- 6.17. Starter
- 6.18. Removal and installation of a starter
- 6.19. Ignition coil
- 6.20. Cover and rotor of the distributor of ignition
- 6.21. Distributor of ignition (SOHC model)
- 6.22. Distributor of ignition (DOHC model)
- 6.23. Repair of the distributor of ignition
- 6.24. Check and adjustment of a corner of an advancing of ignition
- 6.25. Fine tuning of the moment of ignition under the used fuel grade
- 6.26. Electronic modules
- 6.27. MSTS-i elements
- 6.28. Sensor of speed/provision of a bent shaft (model of 1,8 l)
- 6.29. Motronic system elements
- 6.30. Sensor of a detonation (DOHC model)
- 6.31. DIS module
- 6.32. Sensor of phases of the camshaft (C20 XE engine)
- 6.33. System of prestarting heating
- 6.34. Glow plugs
- 7. Transmission
- 8. Power shafts
- 9. Brake system
- 10. Suspension bracket and steering
- 11. Body
- 12. Electric equipment
- 13. Check of malfunctions
