77d7eb28

6.28. Sensor of speed/provision of a bent shaft (model of 1,8 l)

Removal

Unscrewing of a bolt of fastening of the sensor of speed/provision of a bent shaft on models of 1,8 l

Check of a condition of a sealing ring of the sensor of speed/provision of a bent shaft on model of 1,8 l

PERFORMANCE ORDER
1. The sensor is located in the lower part of the block of cylinders behind the oil pump from a final collector.
2. Remove a weight wire from the accumulator.
3. Release brackets of fixing of an external casing of a gear belt and disconnect from it a sensor electrical wiring.
4. Note an arrangement and disconnect an electrical wiring from the sensor.
5. Unscrew a bolt of fastening of the sensor and take the sensor from the block of cylinders (see rice. Unscrewing of a bolt of fastening of the sensor of speed/provision of a bent shaft on models of 1,8 l).
6. Check a condition of a sealing ring of the sensor and, if necessary, replace it (see rice. Check of a condition of a sealing ring of the sensor of speed/provision of a bent shaft on model of 1,8 l).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Arrange a sensor electrical wiring as appropriate on a casing of a gear belt.