12:24. Sound signal
On models with one sound signal the sound signal is located before a radiator. On models with two sound signals sound signals arrange ны under a windscreen washer tank on the left side of a front bumper.
ONE SOUND SIGNAL
Removal
Arrangement of one sound signal before a radiator
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove a front grille. |
| 3. Disconnect the electric socket from a back part of a sound signal. |
| 4. Unscrew the nut fixing a sound signal to an arm and remove a sound signal (see rice. An arrangement of one sound signal before a radiator). |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
TWO SOUND SIGNALS
Removal
Arrangement of a bolt of fastening of an arm of a sound signal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Tighten the emergency brake, then lift a forward part of the car and fix on supports. |
| 3. In the presence unscrew screws and remove plastic facing from a forward wing / bumper. |
| 4. Unscrew a bolt, the fixing arm of a sound signal to the holder of a tank of windscreen washer (see rice. Arrangement of a bolt of fastening of an arm of a sound signal). |
| 5. Remove sound signals and disconnect from them electric sockets. |
| 6. If necessary remove sound signals from an arm. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
