77d7eb28

12:16. Oil pressure sensor

Removal

Oil pressure sensor arrangement on SOHC engines

Vyvinchivaniye of the oil pressure sensor on the SOHC models

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.
2. The sensor of pressure of oil is screwed in in the oil pump from an inlet collector. On l models 1,4 and 1,6 except C16 NZ2 the sensor of pressure of oil is screwed in perpendicular to an axis of a bent shaft, and on the l C16 NZ2 models 1,8 and 2,0 the sensor is screwed in parallel to an axis of a bent shaft (see rice. An oil pressure sensor arrangement on SOHC engines).
3. For access to the sensor on some models it is necessary to lift a forward part of the car and to remove a forward right wheel.
4. Disconnect the electric socket from the oil pressure sensor and a wrench unscrew the sensor (see fig. of Vyvinchivaniye of the sensor of pressure of oil on the SOHC models). After a sensor vyvinchivaniye as soon as possible close an opening in the oil pump a suitable stopper.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Check the level of oil and, if necessary, bring it to norm.