77d7eb28

12:50. An antenna mast with the electric drive

Removal

PERFORMANCE ORDER
1. The antenna mast with the electric drive can be replaced separately from the antenna drive block.
2. Turn on the radio receiver in order that the antenna started completely.
3. Unscrew an assembly nut of the antenna.
4. Lift the spring plug and release its lower end.
5. Extend an antenna mast up and take it from the antenna drive mechanism.

Installation

Pushing-in of a mast of the antenna before its fixing in the drive mechanism

PERFORMANCE ORDER
1. Insert a spherical washer of a mast of the antenna into the basis.
2. Being careful, push an antenna mast down to fixing it in the antenna drive mechanism (see the drawing).
3. Switch off the radio receiver in order that the antenna completely fell.
4. If the antenna does not fall completely, lower it manually.
5. Insert the spring plug and fix it by an assembly nut.
6. Check operation of the antenna, switching on and off the radio receiver.