1. Close the hatch. |
2. Remove a weight wire from the accumulator. |
3. Using an edge of the thin screw-driver as the lever, remove the lamp of illumination of salon joining when opening doors from the panel of finishing of a ceiling and disconnect from it the electric socket. |
4. Unscrew two screws fixing the panel of finishing of a ceiling and remove it from a ceiling. At the same time disconnect the electric socket from the switch of control of the hatch. |
5. Disconnect the electric socket from the hatch drive electric motor. |
6. Unscrew a nut and remove hatch drive electric motor knot. |