12:46. Elements of window regulators with the electric drive
Prevention
After removal and installation of any element of window regulators with the electric drive it is necessary to program system of window regulators.
Remove a weight wire from the accumulator.
THE SWITCHES INSTALLED ON THE DOOR
Removal
| PERFORMANCE ORDER |
| 1. Using an edge of the thin screw-driver as the lever, remove a decorative slip from the internal handle of opening of a door. |
| 2. Using an edge of the thin screw-driver as the lever, take the switch from a nest and disconnect from it the electric socket. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
THE SWITCHES INSTALLED ON THE CENTRAL CONSOLE
Removal
| PERFORMANCE ORDER |
| 1. Switches are removed as uniform knot. If one of switches is faulty, it is necessary to replace the block of switches. |
| 2. Remove a back part of the central console. |
| 3. Release clamps and take the block of switches from the top part of the central console. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
LEKTRODVIGATELI OF THE DRIVE OF WINDOW REGULATORS
Arrangement of nuts of fastening of the electric motor of a window regulator of a forward door and screw of fastening of the block of impulses
| PERFORMANCE ORDER |
| 1. Remove a window regulator from a door. |
| 2. For removal of the electric motor from a window regulator of a forward door unscrew three nuts, the fixing electric motors and the screw which fixes the block of impulses to a window regulator. Remove the electric motor with the block of impulses. Keep in mind that if the electric motor or the block of impulses are faulty, their replacement needs to be made in collecting (see the drawing). |
| 3. The electric motor of the window regulator established in a back door is an integral part of a window regulator. |
|
