77d7eb28

12.60. Contact block of a safety cushion

Removal

Arrangement of screws of fastening of the contact block of a safety cushion

PERFORMANCE ORDER
1. Remove a safety cushion and a steering wheel.
2. If necessary remove the top and lower casings of a steering column.
3. Disconnect electric sockets from the contact block under a steering column and remove the block from a steering column (see the drawing).

Installation

PERFORMANCE ORDER
1. Before installation of the contact block of a safety cushion check that forward wheels of the car are established in situation for the movement directly forward.
2. Install the contact block on a steering column in the same situation, as before removal. Lay wires from the contact block under the lock of ignition and connect the electric socket.
3. Establish casings of a steering column.
4. Establish a steering wheel and a safety cushion.