77d7eb28

12:59. A steering wheel with a safety cushion

Removal

PERFORMANCE ORDER
1. Remove a safety cushion.
2. Check that the steering wheel is established in situation for the movement directly forward.
3. In the center of a steering wheel unscrew two screws fixing the safety cushion block.
4. Using the screw-driver, wring out uvulas on the washer fixing a nut of fastening of a steering wheel from unscrewing.
5. Unscrew a nut of fastening of a steering wheel.
6. Apply combination tags on a steering wheel and an end face of a steering shaft.
7. Using a stripper, remove a steering wheel.
8. Disconnect the electric socket of a sound signal and remove a steering wheel.

Installation

PERFORMANCE ORDER
1. At installation of a steering wheel combine the tags put before removal.
2. Connect the electric socket of a sound signal.
3. Establish the fixing washer and screw a nut of fastening of a steering wheel. Tighten a nut the required moment and, having unbent uvulas of the fixing washer, block a nut from unscrewing.
4. Screw in two screws fixing the contact block of a safety cushion.
5. Establish a safety cushion.