77d7eb28

12:22. Elements of the on-board computer

PERFORMANCE ORDER
1. Remove a weight wire from the accumulator.

DISPLAY MODULE

Removal

PERFORMANCE ORDER
1. Using an edge of the thin screw-driver as the lever, being careful, remove the module from the dashboard.
2. Disconnect the electric socket from the display module.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

DISPLAY MODULE LIGHTING LAMP

Removal

Extraction of the lighting lamp of the display of the on-board computer

PERFORMANCE ORDER
1. Remove the display module.
2. Using a long rubber tube of the corresponding diameter, take a lamp through an opening sideways of the display module (see rice. Extraction of the lighting lamp of the display of the on-board computer).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

SWITCH OF MANAGEMENT

Removal

PERFORMANCE ORDER
1. Remove a back part of the central console.
2. Using the screw-driver, disconnect the electric socket from the switch.
3. Lift the switch, then move it down and take from the central console.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

SENSOR OF TEMPERATURE OF EXTERNAL AIR

Removal

Arrangement of the sensor of temperature of external air

PERFORMANCE ORDER
1. The sensor is located on the left side on a front bumper (see rice. Arrangement of the sensor of temperature of external air).
2. Using a screw-driver edge as the lever, remove a protective cover of the sensor from a bumper, then remove the sensor and disconnect from it the electric socket.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.