12:56. Elements of the anticreeping alarm system
CONTROL UNIT
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove the lower finishing of the dashboard from the driver. |
| 3. If necessary remove the panel of finishing of deepening for legs. |
| 4. Unscrew a bolt of fastening of the control unit, then disconnect from it the electric socket and take the block from interior of the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
ULTRASONIC SENSOR
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove internal finishing from the central rack. |
| 3. Being careful, remove the panel of finishing of the ultrasonic sensor and lower it down. |
| 4. Disconnect the electric socket and take the ultrasonic sensor from interior of the car. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
SENSOR OF OPENING OF THE COWL
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. The screw-driver release a clamp in the basis of contact of the sensor and take contact. |
| 3. Disconnect the electric socket of contact and remove the sensor. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
