77d7eb28

11.38.7. Radio receiver pocket

Removal

Arrangement of the right adjusting pin behind the control panel of a heater

Removal of the panel of finishing of the radio receiver

Removal of a pocket of the radio receiver from the dashboard

Detachment from a pocket of the radio receiver of the electric socket and the antenna plug

PERFORMANCE ORDER
1. Remove the radio receiver.
2. Remove the lower and top panels of finishing of a combination of devices.
3. Unscrew the fastening screw from the lower right side of the control panel of a heater.
4. Remove from the dashboard hours or the on-board computer.
5. Through an aperture for hours or the on-board computer unscrew two screws of fastening of the control panel of a heater.
Being careful, move the control panel of a heater within length of wires forward and take it from the dashboard, at the same time do not stretch a cable of management of a heater. Adjusting pins of the panel of finishing of the radio receiver are behind adjusting pins of the control panel of a heater (see rice. An arrangement of the right adjusting pin behind the control panel of a heater, Removal of the panel of finishing of the radio receiver).
In the presence unscrew two screws and, having pulled forward, take a radio receiver pocket, then disconnect from it the electric socket and the plug of the antenna (see rice. Removal of a pocket of the radio receiver from the dashboard, the Detachment from a pocket of the radio receiver of the electric socket and the antenna plug).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.