11:17. Doors
FORWARD DOOR
Removal
Detachment of the electric socket from a forward end face of a door
| PERFORMANCE ORDER |
| 1. Hinges of a door are welded on a door and a rack of a body. |
| 2. Prop up a door supports or jacks, having laid between them and a door pure rags. |
| 3. If at doors there are electric drives, remove a weight wire from the accumulator and disconnect the electric socket from a forward end face of a door. For a detachment of the electric socket unscrew an external ring of the socket and take the socket (see the drawing). |
| 4. Using a punch, beat out a cylindrical pin of a rotary axis of the limiter of opening of a door. |
| 5. Remove plastic covers from hinged fingers of a door. A drift beat out hinged fingers and remove a door. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. At installation use a new cylindrical pin of fastening of the limiter of opening of a door. |
| 2. Because hinges of a door are welded on a door and a rack therefore in need of adjustment use special tools to bend hinges. |
| 3. Check that the door lock accurately comes on the shock plate located on a rack. If adjustment is necessary, weaken the screws fixing a shock plate, move a shock plate and tighten fastening screws. |
|
BACK DOOR
Operation on removal and installation of a back door is similar to operation on removal and installation of a forward door. However on models with the central lock or power windows remove a door upholstery, disconnect electric sockets and take them through a forward end face of a door.
