77d7eb28

11:28. External rear-view mirror

REPLACEMENT FLEW DOWN

Mirror glass removal with electric management of a mirror

PERFORMANCE ORDER
1. Replacement of glass of a mirror can be made without removal of a mirror from the car. On models with electric management of mirrors remove a weight wire from the accumulator.
2. Using a screw-driver edge as the lever and being careful, remove mirror glass from the spherical hinge and in the presence disconnect the electric socket of a heater from glass. Be careful not to break glass (see rice. Mirror glass removal with electric management of a mirror).
3. At installation connect the electric socket and just install a mirror on the spherical hinge.

REMOVAL AND INSTALLATION OF THE MIRROR

Removal of a decorative overlay of a mirror from the inside of a door

Unscrewing of the screw of fastening of a mirror

Detachment электричес whom mirror drive socket

Consolidation arrangement on the mirror case

PERFORMANCE ORDER
1. On models with the electric drive of mirrors remove a weight wire from the accumulator.
2. On models with manual adjustment of mirrors remove the lever of adjustment of a mirror.
3. Using a screw-driver edge as the lever, from the inside of a door remove a decorative overlay of a mirror (see rice. Removal of a decorative overlay of a mirror from the inside of a door).
4. Unscrew three screws of fastening and remove a mirror from a door. On models with электричес Kim the drive of a mirror disconnect the electric socket (see rice. Unscrewing of the screw of fastening of a mirror, Detachment электричес whom mirror drive socket).
5. Installation is made in the sequence, the return to removal, but at the same time check correctness of an arrangement of rubber consolidation on the mirror case (see rice. A consolidation arrangement on the mirror case).

REMOVAL AND INSTALLATION OF THE ELECTRIC MOTOR OF THE DRIVE OF THE MIRROR

Removal

Arrangement of screws of fastening of the electric motor of a mirror

PERFORMANCE ORDER
1. Remove mirror glass.
2. Unscrew three screws fixing the mirror electric motor, then disconnect the electric socket and remove the electric motor (see rice. Arrangement of screws of fastening of the electric motor of a mirror).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal, but at the same time check that the electrical wiring of the engine is located behind the engine.