77d7eb28

11:18. Door upholstery

FORWARD DOOR

Removal

Removal of a bracket of fastening of the handle of a window regulator

Removal of decorative finishing of the internal handle of opening of a door

Arrangement of the electric socket of the drive of a rear-view mirror in an arm on the top part of a door

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, remove a decorative overlay of the button of blocking of the door lock, then remove the blocking button from draft of the lock.
2. On models with manual steklopodjemn a lump completely close a window and note a window regulator handle arrangement. Release a bracket of fastening and remove the handle. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits (see rice. Removal of a bracket of fastening of the handle of a window regulator).
3. Using a screw-driver edge as the lever, remove plastic decorative finishing of the internal handle of opening of a door (see rice. Removal of decorative finishing of the internal handle of opening of a door).
4. Unscrew seven screws at the basis of an upholstery of a door and at the basis of the handle of opening of a door/armrest. Take the bracket fixing a pocket of a door which arrange on in the lower back part of a pocket.
5. Using the screw-driver with a wide edge, separate a door upholstery from a door.
6. Unbend an upholstery of a door and take a big bracket in a back part of a door.
7. On models with the electric drive of external rear-view mirrors on a door of the driver disconnect the electric socket from the mirror switch. Remove a weight wire from the accumulator, note a socket arrangement in an arm in the top part of a door and disconnect the electric socket (see rice. An arrangement of the electric socket of the drive of a rear-view mirror in an arm on the top part of a door).
8. On models with marker lights on a door remove a bulb and disconnect the electric socket.
9. Remove a loudspeaker and the back fixing bracket of an upholstery of a door which is attached to a door by one screw from an internal part of a door. Being careful, remove a protective film from a door.
10. If necessary remove a pocket from a door upholstery for what unscrew three screws and release a bracket from a back part of an upholstery of a door.

Installation

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER
1. If at removal the protective film of a door was damaged, replace it as, otherwise, rain water can get into the car or damage a door upholstery.
2. Check reliability of connection and correctness of an arrangement электричес whom the socket of the switch of provision of a mirror.
3. If at removal of an upholstery of a door the fixing brackets were broken, replace them.

BACK DOOR

Removal

Removal of an upholstery of a back door

PERFORMANCE ORDER
1. Using a screw-driver edge as the lever, remove a decorative overlay of the button of blocking of the door lock, then remove the blocking button from draft of the lock.
2. On models with manual steklopodjemn a lump completely close a window and note a window regulator handle arrangement. Release a bracket of fastening and remove the handle. The bracket is released if to insert pure fabric between the handle and an upholstery of a door and, stretching fabric opposite to the ends of a bracket, hook on a bracket and release it. At the same time it is necessary to pull the handle on himself that she after release of a bracket acted from window regulator shlits.
3. Using a screw-driver edge as the lever, remove plastic decorative finishing of the internal handle of opening of a door.
4. On models with power windows remove a weight wire from the accumulator, then, being careful, take the switch from an upholstery of a door and disconnect from it the electric socket.
5. Unscrew three screws fixing a door upholstery. Two screws are located under finishing of the internal handle of opening of a door, and the third – an engine support arm;
5 – in the basis of the additional handle of a door.
6. Using the screw-driver with a wide edge, separate a door upholstery from a door.
7. Remove a door upholstery (see rice. Removal of an upholstery of a back door).
8. Remove a protective film from a door.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal taking into account the next moments.
2. If at removal the protective film of a door was damaged, replace it as, otherwise, rain water can get into the car or damage a door upholstery.
3. Arrange a window regulator switch electrical wiring so that it did not interfere with work стеклоподъ an emnik.
4. If at removal of an upholstery of a door the fixing brackets were broken, replace them.