77d7eb28

11:36. Crank drive

Removal

Unscrewing of the screw of fastening of the panel of finishing of a ceiling

Removal of the panel of finishing from a ceiling

Arrangement of screws of fastening of a crank

PERFORMANCE ORDER
1. Remove finishing and unscrew the screw of fastening of the handle of the drive of a crank and remove a crank from a drive axis.
2. Remove a weight wire from the accumulator, then remove a plafond of illumination of salon from finishing of a ceiling and disconnect from it the electric socket.
3. Unscrew two screws and remove the finishing panel from a ceiling (see rice. Unscrewing of the screw of fastening of the panel of finishing of a ceiling, Removal of the panel of finishing from a ceiling).
4. Unscrew two screws and remove the crank drive in collecting (see rice. Arrangement of screws of fastening of a crank).

Installation

Installation is made in the sequence, the return to removal taking into account the next moments...

PERFORMANCE ORDER
1. Before installation of the handle adjust the crank drive as follows.
2. Temporarily install the handle by the face forward and press the blocking button.
3. Remove the handle of a crank and manually turn the leading gear wheel of a crank counterclockwise against the stop.
4. Install the crank handle so that it was directed forward, then screw in the screw of fastening and establish finishing.