11:27. Window regulators
FORWARD DOOR
Removal
| PERFORMANCE ORDER |
| 1. Half lower glass, then remove an upholstery of a door and a protective film. |
| 2. Record glass in half open situation, having established under it a wooden emphasis. |
| 3. Using a drill with a diameter of 8,5 mm drill the rivets fixing стеклоподъ an emnik to a door. |
| 4. Remove the plastic limiter from the top guide of glass. |
| 5. Unscrew two screws fixing the lower guide to a door and lower a guide. |
| On models with electric steklopod emnik remove a weight wire from the accumulator, then disconnect the electric socket from the window regulator drive. |
| Being careful, take a window regulator through the lower aperture at doors. |
|
Installation
Window regulator of a forward door
|
|
1 – arrangement of rivets of fastening of a window regulator;
2 – arrangement of the lower screws of fastening of a guide;
3 – top guide and limiter
|
Installation is made in the sequence, the return to removal taking into account the next moments...
| PERFORMANCE ORDER |
| 1. Before fastening of a window regulator to a door check that holders of a window regulator are correctly established in guides (see the drawing). |
| 2. Using new rivets, fix a window regulator on a door. |
| 3. Adjust a corner of lower I direct glass Russian cabbage soup after weakening of two screws. |
| 4. Establish an internal upholstery of a door. |
| 5. On models with power windows program the control unit as follows. |
| 6. Close all doors and include ignition. |
| 7. Close each glass, using the corresponding switch and after when glass is lifted up to an emphasis, hold the switch pressed 5 more sec. |
|
BACK DOOR
Removal
| PERFORMANCE ORDER |
| 1. Half lower glass, then remove an upholstery of a door and a protective film. |
| 2. Record glass in half open situation, having established under it a wooden emphasis. |
| 3. Using a drill with a diameter of 8,5 mm drill the rivets fixing стеклоподъ an emnik to a door. |
| 4. On models with power windows remove a weight wire from the accumulator, then disconnect the electric socket from the drive стеклоподъ an emnik. |
| 5. Being careful, take a window regulator through the lower aperture at doors. |
|
Installation
Installation is made in the sequence, the return to removal taking into account the next moments...
| PERFORMANCE ORDER |
| 1. Before fastening of a window regulator to a door check correctness of placement of the lever of a window regulator in a guide. |
| 2. Using new rivets, attach a window regulator to a door. |
| 3. Check work of a window regulator and establish an internal upholstery of a door. |
| 4. On models with power windows program the control unit as follows. |
| 5. Close all doors and include ignition. |
| 6. Close each glass, using the corresponding switch and after when glass is lifted up to an emphasis, hold the switch pressed 5 more sec. |
|
