77d7eb28

11:41. Sitting (without mechanisms of a tension of seat belts)

FORWARD SITTING

Removal

Removal of an external decorative overlay of a guide of sitting

Removal of finishing from a back part of an internal guide of sitting

Vyvinchivaniye and removal of a bolt of fastening of a guide of forward sitting to a floor

PERFORMANCE ORDER
1. Unscrew the fastening screw from the forward party of an external decorative overlay of a guide of sitting, then remove a slip (see rice. Removal of an external decorative overlay of a guide of sitting).
2. Remove finishing from a back part of an internal guide of sitting (see rice. Removal of finishing from a back part of an internal guide of sitting).
3. Unscrew four bolts, fixing a sitting guide to a floor, then remove sitting together with guides (see fig. of Vyvinchivaniye and removal of a bolt of fastening of a guide of forward sitting to a floor).
4. If necessary remove I direct shchy from sitting.

Installation

It is recommended to use new bolts of fastening of guides of sitting to a floor.

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

PILLOW OF BACK SITTING (EARLY MODELS)

Removal

Extraction of a hinged finger of fastening of a pillow of back sitting on models with SOHC engines

PERFORMANCE ORDER
1. Lift a back part of a pillow of sitting and move it for access to hinged fingers from the forward party of a pillow of back sitting forward.
2. Remove a lock ring from a hinged finger and take a hinged finger (see rice. Extraction of a hinged finger of fastening of a pillow of back sitting on models with SOHC engines).
3. Take a pillow of back sitting from the car.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

PILLOW OF BACK SITTING (LATE MODELS)

Removal

PERFORMANCE ORDER
1. Having pulled a pillow from two parties, release it from clamps and take from interior of the car.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

BACK OF BACK SITTING (CONTINUOUS)

Removal

PERFORMANCE ORDER
1. Reject forward or remove a pillow of back sitting and incline a back of back sitting forward.
2. In the presence unbend a uvula on the panel of a body and take off two rubber belts fixing sitting back end faces to the body panel.
3. Take percussion caps of fastening and move the finishing closing hinges on a back of back sitting.
4. Unscrew screws, the fixing hinges to a back of back sitting and take a back from interior of the car.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.

BACK OF BACK SITTING (SEPARATE)

Removal

Arrangement of the uvula fixing a rubber belt of a back of back sitting

Unscrewing of the screw of fastening of the hinge to a back of back sitting

Arrangement of the central hinge of fastening of a back of back sitting

PERFORMANCE ORDER
1. Incline forward or remove a pillow of back sitting.
2. In the presence unbend a uvula on the panel of a body and take off the rubber belt fixing the corresponding half of a back of sitting to a body (see rice. Arrangement of the uvula fixing a rubber belt of a back of back sitting).
3. Take percussion caps and move the finishing closing hinges of a back of back sitting back.
4. Unscrew screws, the fixing hinges to a back of back sitting (see rice. Unscrewing of the screw of fastening of the hinge to a back of back sitting).
5. In the central part of a back of back sitting wring out a sitting pillow from the central arm for access to a nut and a bolt of fastening. Keep in mind that the bolt passes through two half of a back of back sitting (see rice. Arrangement of the central hinge of fastening of a back of back sitting).
Unscrew a nut and take a bolt and, being careful, remove a back of back sitting.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal.
2. Fix rubber belts of a back of back sitting by bending back of a uvula.