77d7eb28

5.3.15.4. Central section

Removal

Arrangement of the clip fixing the central and back sections of the exhaust system on models with the SOHC engine

Arrangement of rubber pillows of fastening of the central section of the exhaust system on models with DOHC engines

PERFORMANCE ORDER
1. Lift the car and record on supports or install it over a viewing hole.
2. Unscrew a coupling bolt and disconnect the central section of the exhaust system from back section (see rice. Arrangement of the clip fixing the central and back sections of the exhaust system on models with the SOHC engine). If necessary, use the hammer for division of sections of the exhaust system.
3. Unscrew nuts and bolts and disconnect the muffler or the catalyst from a connecting flange of the central section of the exhaust system. Remove laying.
4. Take the central section of the exhaust system from rubber pillows on the bottom of the car and take it from under the car (see rice. An arrangement of rubber pillows of fastening of the central section of the exhaust system on models with DOHC engines).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At installation use new laying on a connecting flange, and at connection of pipes of the central and back section of the exhaust system grease pipes with special paste for assembly of the exhaust system. Tighten all bolts and nuts the required moment.