| 1. On models with the catalyst remove a weight wire from the accumulator, then disconnect the electric socket of the sensor of oxygen located behind a broad tank. |
| 2. Lift a forward part of the car and record on supports or install the car over a viewing hole. |
| 3. Remove an engine mudguard. |
| 4. Unscrew two bolts and disconnect a reception exhaust pipe from the muffler or the catalyst. Remove a sealing ring and springs. |
| 5. Unscrew a reception exhaust pipe from an arm on the block of cylinders. |
| Working in a motor compartment, unscrew the bolts fixing the thermofilter of a final collector to a head of the block of cylinders. |
| Unscrew two lower nuts fixing a final collector which at the same time fix arms of the thermofilter and remove the thermofilter (see the drawing). |
| Unscrew other nuts of fastening of a final collector and remove from the car a final collector together with a reception exhaust pipe. Remove laying of a final collector. |
| If at a vyvinchivaniye of nuts of fastening of a final collector from a head of the block of cylinders hairpins were unscrewed, then before installation of a collector screw in hairpins in a head of the block of cylinders. |
