9.31. Brake pedal
Removal
Arrangement of a spring bracket of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal
The brake pedal removed from the car
|
|
1 – blocking bracket;
2 – returnable spring of a pedal;
3 – hinged finger of a pedal |
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove the lower finishing of the dashboard in deepening for the driver's legs. |
| 3. Disconnect the electric socket from the stoplight switch, then counterclockwise unscrew the switch and take it from an arm. |
| 4. Remove a spring bracket on the right side of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal (see rice. Arrangement of a spring bracket of a hinged finger, the fixing fork of thirst of the vacuum amplifier of brakes for a brake pedal). |
| 5. Using flat-nose pliers, remove the end of a returnable spring from a pedal of a brake and take the hinged finger fixing a fork of thirst of the vacuum amplifier of brakes for a brake pedal (see rice. The brake pedal removed from the car). |
| 6. Remove a blocking bracket from the left end of a hinged finger of a pedal. |
| 7. Since the left end of a hinged finger unscrew a nut and take a hinged finger from a brake pedal arm. Remove washers from a hinged finger of a pedal of a brake and note their arrangement. |
| 8. Remove a pedal together with a returnable spring. |
|
Installation
Installation is made in the sequence, the return to removal taking into account the next moments...
| PERFORMANCE ORDER |
| 1. Before installation of a pedal of a brake check correctness of an arrangement of a returnable spring. |
| 2. Apply a thin film of lubricant on the basis of a molybdenum disulfide on a hinged finger of a pedal of a brake. |
| 3. Check that washers on a hinged finger of a pedal of a brake are established, as well as before removal. |
|
