77d7eb28

9.14. A back brake disk on models with DOHC engines

Removal of a brake disk from a nave on models with DOHC engines

Removal

PERFORMANCE ORDER
1. Unscrew a bolt of fastening of a wheel with a thick washer which were established when checking a beating of a disk.
2. Remove brake shoes.
3. Remove a brake support and, using a soft wire, tie up it to a back rack. At the same time do not stretch and do not overwind a brake hose.
4. Unscrew the screw, the fixing brake disk and remove it from a nave. Before removal of a brake disk check that the emergency brake is completely released. If the brake disk still is not removed through an opening in a brake board take away blocks of the emergency brake from a drum of a brake disk.

Installation

PERFORMANCE ORDER
1. Before installation of a brake disk, using the corresponding tap, clear a carving in openings for bolts of fastening of a support to the holder of a nave. Also clear a carving in an opening for the screw of fastening of a brake disk to a nave.
2. Check and, if necessary, clear the interfaced surfaces of a brake disk and a nave. At installation of a new brake disk remove a sheeting layer from its surface.
3. Installation is made in the sequence, the return to removal. Before a vvinchivaniye of the screw of fastening of a brake disk apply the means interfering unscrewing of the screw on a screw carving. Establish brake shoes.