77d7eb28

9.12. Forward brake disk

Removal

Unscrewing of the screw of fastening of a brake disk to a nave

PERFORMANCE ORDER
1. Unscrew a bolt of fastening of a wheel with a thick washer which were established when checking a beating of a disk.
2. Remove brake shoes.
3. On models with engines of 2,0 l unscrew two bolts and remove the holder of a support.
4. Unscrew the screw, the fixing brake disk to a nave and remove a brake disk (see the drawing). If the brake disk sits densely on a nave, from a reverse side of a disk knock on it with a kiyanka.

Installation

PERFORMANCE ORDER
1. Before installation of a brake disk, using the corresponding tap, clear a carving in openings for bolts of fastening of a support to a rotary fist. Also clear a carving in an opening for the screw of fastening of a brake disk to a nave.
2. Check and, if necessary, clear the interfaced surfaces of a brake disk and a nave. At installation of a new brake disk remove a sheeting layer from its surface.
3. Installation is made in the sequence, the return to removal. Before a vvinchivaniye of the screw of fastening of a brake disk apply the means interfering unscrewing of the screw on a screw carving.