| 1. Moving the selector lever to all provisions, check that at the same time the lever of the choice of transfers on the transmission is also installed in the relevant provision. Situation P levers of the choice of transfers is located in a forward part, and situation N has a tag, at the same time all other provisions are noted (see rice. Installation of the lever of the choice of transfers on the transmission to situation P (1) and N (2)). Check that when moving the lever to situation P wheels are blocked. |
| 2. For carrying out adjustment install the lever of the choice of transfers to situation P. Release fastening of the panel of the lever of the selector for what press on two clamps from two parties of the panel and move the panel aside (see rice. Adjustment of a cable of gear shifting). |
| 3. Through the opened aperture a cap key weaken a bolt of fastening of a cable. |
| 4. In a motor compartment move a control lever with the transmission to its emphasis to the limiter forward and to the right. |
| 5. Holding the lever in this situation, tighten a bolt of fastening of a cable the required moment. |
| 6. Install the panel of the lever of the selector and check operation of the mechanism of the choice of transfers. |
