77d7eb28

7.3.15. Replacement of sealing rings of differential

Removal

PERFORMANCE ORDER
1. Sealing rings of bearings of differential can be replaced on the transmission installed in the car.
2. In the presence take off a cap from a forward wheel, then weaken bolts of fastening of a wheel. Tighten the emergency brake, then lift a forward part of the car and record on supports. Unscrew bolts and remove a forward wheel.
3. Take the forelock, then unscrew the koronchaty nut fixing the spherical hinge connecting the lower lever from a resistant forward suspension bracket.
4. Using a stripper of spherical hinges, squeeze out a pin of the spherical hinge.
5. Merge transmission liquid.
6. Having pulled a nave of a forward wheel outside, take the internal end of a power shaft from differential. Using a soft wire, tie the internal end of a power shaft to a body.
7. Using a screw-driver edge as the lever, take a sealing ring from differential.

Installation

PERFORMANCE ORDER
1. Grease working edges of a new sealing ring with gearbox oil, then, using a tubular mandrel of the corresponding diameter, establish a new sealing ring in a differential nest.
2. Establish in a flute on the internal end of a power shaft a new lock ring and insert a power shaft into differential.
3. Install the spherical hinge connecting the lower lever of a forward suspension bracket from a resistant suspension bracket and screw a koronchaty nut on a pin of the hinge and tighten it the required moment. Insert the new forelock fixing a nut from unscrewing.
4. Establish a wheel, then lower the car on the earth and finally tighten bolts of fastening of a wheel. In the presence establish a wheel cap.
5. Fill in oil in the transmission.