7.3.11. Submode switches
SWITCH OF THE ECONOMIC/SPORTS SUBMODES
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove the selector lever. |
| 3. Insert a thin steel core into the lower end of the lever and squeeze out the switch. |
| 4. Mark and unsolder wires from the switch. |
|
Installation
| PERFORMANCE ORDER |
| 1. According to earlier made marking solder wires to the new switch. |
| 2. Install the selector lever. |
|
SWITCH OF THE WINTER SUBMODE
Removal
| PERFORMANCE ORDER |
| 1. Remove a weight wire from the accumulator. |
| 2. Remove the selector lever panel from the central console for what release on two clamps from two parties of the panel, then move the panel aside and disconnect the electric socket from the switch. |
| 3. Using a screw-driver edge as the lever, take the switch from the panel. |
|
Installation
| PERFORMANCE ORDER |
| 1. Installation is made in the sequence, the return to removal. |
|
.
