| 1. Tighten the emergency brake and install the selector lever in situation P. |
| 2. Remove a weight wire from the accumulator. |
| 3. In interior of the car release the selector panel from the central console for what from two parties of the panel wring out two clamps and lift the panel. Remove an ashtray. Move a back part of the central console and remove the selector lever panel. Check that the emergency brake is tightened, and move the selector lever to situation 2. |
| 4. Weaken a bolt of fastening of a cable, then unscrew a lock-nut and take a cable from the lever. Disconnect electric sockets from switches of the submodes and remove the holder of a lamp of illumination of the modes of the chosen transfer. |
| 5. Unscrew the nut fixing the selector lever to an axis and, turning, take the lever (see the drawing). |
