77d7eb28

3.3.6. Cover of a head of the block of cylinders

Cover of a head of the block of cylinders

1 – stopper;

2 – to a cover of a head of the block of cylinders;

3 – laying

Removal

Removal of a semicircular rubber cap on the left side of a head of the block of cylinders

PERFORMANCE ORDER
1. Weaken collars and disconnect a hose of ventilation of a case of the engine from a back part of a cover of a head.
2. Unscrew bolts of fastening of a cover of a head and remove together with washers. Uncover a head of the block of cylinders. Remove a semicircular rubber cap from the left forward side of a head of the block of cylinders (see rice. Removal of a semicircular rubber cap on the left side of a head of the block of cylinders).
3. Check a condition of laying of a head and a semicircular cap.

Installation

Installation of laying in a groove of a cover of a head of the block of cylinders

PERFORMANCE ORDER
1. Check that the interfaced surfaces of a cover of a head and a head of the block of cylinders, pure and dry. Establish laying in a flute of a cover of a head of the block of cylinders (see rice. Installation of laying in a groove of a cover of a head of the block of cylinders).
2. Apply a thin film of sealant in a nest for installation of a semicircular cap and establish a cap.
3. Establish a head cover on a head of the block of cylinders, establish laying under bolts and fix a cover by bolts, having tightened them the required moment.
4. Connect a hose of ventilation of a case and fix it by a collar.