Opel Vectra A - the Repair manual and operation

3.3.22. Replacement of sealing rings of a bent shaft

Right sealing ring

PERFORMANCE ORDER

1. Remove a pulley of a bent shaft. 2. Drill two small openings located in the opposite ends of consolidation in a sealing ring. Screw in two I samonarezat shchy the screw in the drilled openings of a sealing ring and, using flat-nose pliers, extend a sealing ring for heads of screws. 3. Clear a nest of a sealing ring. 4. Oil pure engine working edges of a new sealing ring and establish it on a bent shaft. Working edges of a new sealing ring have to be directed inside. 5. Remove all traces of engine oil and establish a pulley on a bent shaft.

Left sealing ring

PERFORMANCE ORDER

1. Remove a flywheel. 2. Drill two small openings located in the opposite ends of consolidation in a sealing ring. Screw in two I samonarezat shchy the screw in the drilled openings of a sealing ring and, using flat-nose pliers, extend a sealing ring for heads of screws. 3. Clear a nest of a sealing ring. 4. Oil pure engine working edges of a new sealing ring and establish it on a bent shaft. Working edges of a new sealing ring have to be directed inside. 5. Establish a flywheel.