3.3.26. Repair of the engine
The main operations on repair of the engine are similar to operations on repair of the SOHC engine (see subsection 2).
It is the most convenient to perform works on the engine if it is installed on a special bed.
Before repair of the engine it is necessary to remove from it:
– inlet and final collectors;
– arm of the pump of strengthening of steering and generator;
– water pump;
– elements of fuel system;
– plait of wires both all electric switches, and sensors;
– oil filter;
– flywheel.
If it is necessary to make only repair of the block of cylinders, a bent shaft, pistons and rods, it is necessary to remove a head of the block of cylinders, the oil pallet, the oil pump and a gear belt of the drive.
In need of carrying out complete capital repairs it is necessary to remove from the engine:
– inlet and final collectors;
– gear belt of the drive, pulleys and mechanism of a tension;
– head of the block of cylinders;
– flywheel;
– oil pallet;
– oil pump;
– pistons with rods;
– bent shaft.