8.5. Replacement of hinges of a power shaft
After the run the car of 80 000 km recommends to replace a power shaft together with hinges.
Arrangement of a lock ring which fixes the hinge of a power shaft to a power shaft
Use of the hammer for removal of the hinge from a power shaft
| PERFORMANCE ORDER |
| 1. Remove a power shaft. Remove collars of fastening of a protective cover of a power shaft and shift a rubber protective cover on a power shaft. |
| 2. Using flat-nose pliers or the screw-driver, expand a lock ring which fixes the hinge of a power shaft to a power shaft (see rice. An arrangement of a lock ring which fixes the hinge of a power shaft to a power shaft). |
| 3. Using the rubber hammer or a kiyanka, bring down the hinge from a power shaft (see rice. Use of the hammer for removal of the hinge from a power shaft). |
| 4. Install the hinge with a new lock ring on a power shaft so that the lock ring was accurately recorded in a flute of a power shaft. |
| 5. Fill the hinge with lubricant. |
| 6. Establish a rubber protective cover of the hinge. |
| 7. Install a power shaft in the car. |
|
