77d7eb28

5.1.19.3. Solenoid of secondary movement

Removal

Arrangement of the screw of fastening of the solenoid of secondary movement and tire of grounding

PERFORMANCE ORDER
1. The solenoid of secondary movement works together with the main block of a diaphragm.
2. Remove a weight wire from the accumulator.
3. On early models remove the air filter. On later models disconnect the air duct from the air filter, then disconnect a vacuum pipe and a hose of ventilation of a case from an air chamber. Unscrew three screws and remove an air chamber together with an air duct.
4. Disconnect a vacuum tube from the diaphragm block.
5. Disconnect the electric socket, unscrew the screw of fastening and remove the solenoid and an arm from the carburetor. Keep in mind that the screw of fastening of the solenoid also fixes the grounding tire электричес whom the socket (see the drawing).

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal. At screwing up of the solenoid do not forget to screw also the grounding tire.