77d7eb28

7.2.4. Gear shifting lever knot

Removal

PERFORMANCE ORDER
1. In a motor compartment weaken tightening a bolt, the fixing rod of the mechanism of the choice of transfer to draft.
2. Remove the gear shifting lever.
3. Remove a forward part of the central console.
4. Unscrew four bolts fixing gear shifting lever knot to the car bottom.
5. Move knot of the lever of the choice of transfers together with a rod to a back part of the car and take a rod through a partition, at the same time the assistant has to remove from the end of a rod a clip not to damage rubber consolidation in a partition.
6. If necessary replace rubber consolidation in a partition.

Installation

PERFORMANCE ORDER
1. For replacement of the plug of a rod of the mechanism of the choice of transfers move a rod from gear shifting lever knot. Using a screw-driver edge as the lever, remove assembly of the plug from gear shifting lever knot, then take the plug from a casing. You make assembly in the sequence, the return dismantling, at the same time grease with silicone lubricant the internal surface of the plug.
2. Installation is made in the sequence, the return to removal, but before tightening tightening a bolt of a rod of the mechanism of the choice of transfers, adjust draft of the mechanism of the choice of transfers.