Enjoy ad-free streaming with 1.16. Lighting
Control of range of lighting (proofreader of light of headlights)
At the turned-on passing beam it is necessary to adjust range of lighting depending on loading of the car:
0 = sitting of the driver is occupied,
1 = all sitting are busy,
2 = all sitting are busy plus loading of a luggage carrier,
3 = sitting of the driver plus loading of a luggage carrier is occupied.
The correct control reduces dazzle of other participants of the movement.
Backing fires
Join at inclusion of transfer of a backing and ignition.
Fog lights
 |
The switch is located near the lighting switch. Green control lamp of inclusion. |
Back fog fires
 |
The switch is located near the lighting switch. Yellow control lamp of inclusion. |
Internal lighting
 |
Joins when opening any of doors. After closing it is switched off with a delay as well at inclusion of ignition. Constant mode: turn on the lighting switch. |
Lighting of the dashboard
 |
Joins together with external lighting. Brightness is adjusted by the regulator. |
 |
 |
Lighting of the information display
Lights up at inclusion of ignition. Brightness is adjusted by the regulator.
The switch back = is switched on
The switch forward = it is switched off
Lamps for reading in a back part of salon
The switch back = is switched on
The switch in the middle = it is switched off
The switch forward = the light is turned on when opening one of back doors
Illumination of a ware box
Lights up at the included ignition and opening of a cover of a ware box.
Lights up at the included ignition.
Illumination of a luggage carrier
Burns at an open trunk lid.
Illumination of a motor compartment
Burns at inclusion of external lighting and opening of a cowl.